Shading

Pencil Shading for Beginners: Techniques and Easy Exercises

Learn pencil shading from scratch: the tools you need, how light falls on a form, the main shading techniques, and a set of easy exercises in a sensible order.

On this page
  1. What you need to start shading
  2. How to hold the pencil for shading
  3. How light falls on a form
  4. The main pencil shading techniques
  5. How to use HB, 2B, 4B and 6B pencils together
  6. Easy shading exercises in order
  7. Common beginner mistakes
  8. Easy subjects for kids and new artists
  9. How to keep improving

Shading is what turns a flat outline into something that looks solid. The good news is that it rests on a few simple ideas: light hits one side of an object, the other side turns away into shadow, and your job is to record those changes in value, from light to dark, with your pencil.

This guide covers the tools, the main techniques and a set of exercises in a sensible order. Each section links to a more detailed article if you want to go further.

What you need to start shading

You don’t need much. A few pencils, decent paper and an eraser will take you a long way.

Pencils

Graphite pencils are graded on a scale from hard (H) to soft (B). H pencils make lighter, crisper marks and hold a point well. B pencils lay down more graphite, so they go darker and blend more easily, but they smudge more. HB sits in the middle.

A small set is plenty to begin with:

  • 2H or H for light construction lines and the palest tones
  • HB for general drawing and light-to-middle values
  • 2B for middle tones
  • 4B and 6B for shadows and the darkest accents

Many art supply brands sell graded sets of 6 to 12 pencils, and student-grade sets are fine for learning. If you’re not sure which grades to buy first, see which pencil is most suitable for shading.

Paper

Use a medium-weight drawing or cartridge paper with a little texture (often called “tooth”). Tooth grips the graphite and lets you build up layers. Very smooth paper looks clean but fills up quickly. Thin printer paper is fine for warm-ups, but it tears and dents easily when you layer.

Erasers and blending tools

  • Kneaded eraser: a soft, putty-like eraser you can shape to a point. Press and lift it to lighten areas or pull out highlights without scrubbing the paper.
  • Plastic (vinyl) eraser: for cleaner, more complete removal.
  • Blending stump or tortillon: rolled-paper tools for smoothing graphite. They’re useful, but optional at first. See our guide to blending stumps and tortillons for when and how to use them.
  • A scrap sheet of paper to rest your hand on so you don’t smudge your work.

A sharpener or craft knife and some fine sandpaper (for shaping the lead) round out the kit.

How to hold the pencil for shading

For writing, you hold the pencil close to the tip. For shading, try holding it further back and tilting it so more of the side of the lead touches the paper. This gives you broader, softer marks and makes it easier to keep the pressure light and even.

Save the upright, close-to-the-tip grip for details, edges and dark accents. Switching between the two grips is a habit worth building early.

How light falls on a form

Before the techniques, it helps to know what you’re trying to show. When a single light shines on a round object such as a ball, you’ll usually see these zones:

  1. Highlight: the brightest spot, facing the light most directly.
  2. Light side / mid-tones: values that darken gradually as the surface turns away from the light.
  3. Core shadow: the darkest band on the object itself, where the form turns fully away from the light.
  4. Reflected light: a slightly lighter zone inside the shadow, caused by light bouncing back from the table or nearby surfaces.
  5. Cast shadow: the shadow the object throws onto the surface it sits on, usually darkest right where the object touches the surface.

Keep reflected light subtle. It is still part of the shadow and should stay darker than the lit side. Our article on cast shadows, core shadows and reflected light goes through each zone in more detail.

The main pencil shading techniques

People often ask about “the 7 types of shading.” Lists differ from teacher to teacher, but these are the techniques that show up most often.

Hatching

Parallel lines drawn in one direction. Lines that are closer together, or drawn with more pressure, read as darker. Hatching is quick and gives a drawing a lively, visible texture.

Cross-hatching

Layers of hatching laid at different angles over each other. Each new layer darkens the area. It’s a good way to build a range of values from line alone. For a plain-language breakdown, see how to explain cross-hatching.

Smooth (gradient) shading

Using the side of the lead with light, overlapping strokes so the individual marks disappear into an even tone. You darken by adding more layers or a little more pressure, not by pushing hard on the first pass.

Circulism (scumbling)

Tiny overlapping circles or scribbles. Done small and light, they build a soft, even tone that’s useful for skin and smooth surfaces. Done larger and looser, they suggest rougher textures.

Stippling

Building tone with dots. Dense dots read as dark and sparse dots read as light. It’s slow, but it gives you a lot of control and a distinctive texture. It’s more common in pen and ink than in pencil. See stippling with pen and ink for technique and exercises.

Contour hatching

Hatching lines that curve to follow the surface of the form, like lines of latitude on a globe. This describes the shape as well as the value. Try it on a ball in how to cross-hatch a sphere.

Blending

Smoothing graphite with a stump, tortillon, tissue or soft brush. It can produce very smooth gradients. Overdo it, though, and a drawing can look muddy or lose its texture. Many artists build most of the tone with the pencil and blend only lightly at the end.

How to use HB, 2B, 4B and 6B pencils together

A simple way to think about it is to give each grade a job:

  • Sketch the outline and placement lightly with HB (or 2H if you press hard).
  • Lay in the light and middle tones with HB and 2B.
  • Build the shadow side and cast shadow with 2B and 4B.
  • Add the darkest accents, such as the core shadow and the contact point under an object, with 4B or 6B.

Two points help. First, work from light to dark, because it’s much easier to darken than to lighten. Second, a light grade pressed hard doesn’t behave like a soft grade. Heavy pressure with an H pencil can dent the paper and leave a shiny surface. When you need it darker, it usually works better to switch to a softer pencil than to press harder. Our guide to using HB, 2B, 4B and 6B pencils covers each grade in more depth.

Easy shading exercises in order

These exercises build on each other. Spend as long as you like on each one. Repeating the early ones is never wasted time.

1. Value scale

Draw a row of boxes and fill them from the white of the paper to the darkest dark you can make, in even steps. It trains your pressure control and shows you the range of each pencil. Our step-by-step guide on how to make a 9-step value scale walks you through it.

2. Gradient strip

Shade a long rectangle that goes smoothly from dark at one end to light at the other with no visible steps. Try it once with hatching, once with smooth shading and once with circulism.

3. Sphere

The classic shading exercise. A sphere contains every zone of light and shadow in one simple shape. Start with how to draw a sphere easily, then try a line-only version in how to cross-hatch a sphere.

4. Cube and cylinder

A cube teaches flat planes with distinct values: usually one light face, one mid-tone face and one dark face. A cylinder teaches a gradient that runs around a curve in one direction. Together with the sphere, they cover most of the shapes you’ll see in everyday objects.

5. A simple object

Choose something with a simple shape, such as a mug, an egg, an apple or a jar, and light it with a single lamp from one side. Our guide to easy object drawing with pencil shading suggests subjects and walks through the process.

6. A small still life

Group two or three objects so they overlap and cast shadows on each other. A bowl or basket of fruit is a traditional choice. See how to draw a fruit basket in pencil for a step-by-step version.

Common beginner mistakes

  • Dark outlines left in. Real objects rarely have a dark line around them. Keep construction lines light, and let edges come from the contrast between values.
  • Pressing too hard too early. Heavy first marks dent the paper and are hard to erase. Build up in layers.
  • Not enough contrast. Many early drawings stay in the middle grays. Compare your darkest dark with your value scale and be willing to go darker.
  • Shading without a light source. Decide where the light comes from before you start, and keep it consistent.
  • Over-blending. Rubbing everything smooth can flatten the form and make the paper shiny. Blend selectively.
  • Burnishing. Once soft graphite fills the paper’s tooth and goes shiny, further layers won’t take. Use lighter pressure and more layers instead.
  • Smudging with your hand. Rest your hand on a scrap sheet. Right-handed artists often find it helps to work from left to right, and left-handed artists from right to left.

Easy subjects for kids and new artists

Younger artists, and anyone starting out, usually do best with subjects that have clear, simple shapes:

  • A ball, an egg or an orange
  • A mug or a cup
  • A single apple, pear or banana
  • A cardboard box or a stack of books
  • A folded towel or a crumpled piece of paper
  • A leaf or a feather

Shining a desk lamp on the subject from one side makes the light and shadow much easier to see than overhead room lighting does.

How to keep improving

Short, regular practice tends to help more than occasional long sessions. A 10- to 15-minute daily warm-up of value scales or spheres, followed by drawing a real object, builds control quickly. Draw from real objects where you can, because photos often flatten or exaggerate shadows. Keep your old drawings so you can see how far you’ve come.

Keep exploring

Guides from other topics

All topics →