A simple definition
Cross-hatching is a way of shading by drawing layers of parallel lines that cross over each other. One set of lines gives a light tone. Each additional set, laid at a different angle on top, makes the area darker. By controlling how many layers you add, how close the lines are and how hard you press, you can create a full range of values from light gray to near black using lines alone.
That definition works for most audiences. The rest of this article covers how to expand on it.
Hatching vs cross-hatching
The two terms are closely related:
- Hatching is a single layer of parallel lines, all going in the same direction, with no crossing.
- Cross-hatching adds one or more extra layers of parallel lines at different angles, so the lines intersect.
Hatching on its own can create a range of tones by changing the spacing and pressure. Cross-hatching extends that range, because the crossing layers fill in more of the white paper and build darker values more quickly.
How cross-hatching creates light and dark
The tone you see comes from the balance between the lines and the white paper left between them. Several things affect it:
- Number of layers: more layers = darker
- Spacing: lines closer together = darker
- Line weight: thicker or heavier lines = darker
- Pressure (in pencil): more pressure = darker lines
- Angle between layers: layers crossing at a wide angle (close to 90 degrees) tend to produce a mesh pattern. Smaller angles can look more textured or woven.
From a distance, the eye blends the lines into a tone, a little like how printed photos are made of tiny dots.
Ways to explain it to students or kids
Analogies can help make the idea click:
- “Like weaving.” The first layer is like the threads going one way, and the next layer is like threads woven across them. The more you weave, the less background shows through.
- “Like a window screen or a fence.” One set of slats lets lots of light through. Add a second set across them and less light gets through.
- “Stacking shade.” Each new layer is like adding another sheet of tinted plastic: the more you stack, the darker it gets.
For younger learners, it often works best to show rather than tell: draw one box with one layer, then add a layer at a time while they watch the box get darker.
A quick demonstration exercise
This short exercise makes the idea concrete:
- Draw four squares in a row, each about 3 cm (just over an inch) across.
- Square 1: fill it with evenly spaced diagonal lines going one way.
- Square 2: do the same, then add a second layer of diagonals going the other way.
- Square 3: repeat square 2, then add a layer of vertical lines.
- Square 4: repeat square 3, then add a layer of horizontal lines.
You now have a four-step value scale made only of lines. Leave a fifth square blank for white, and you can see the full range. This also makes a good warm-up before drawing. For a smoother version using graded pencils, see how to make a 9-step value scale.
Types of hatching
- Straight hatching: straight parallel lines. Simple and graphic.
- Contour hatching: lines that curve to follow the surface of a form, like lines of latitude on a globe. They describe the shape as well as the tone.
- Cross-contour hatching: layers of curved lines that cross each other, following the form in two directions.
- Scribbled or loose hatching: less regular lines, often used for quick sketches and rough textures.
To see straight and contour hatching applied to a 3D form, try cross-hatching a sphere.
Where cross-hatching is used
Cross-hatching has a long history in drawing and printmaking. It was widely used in engraving and etching, where printers couldn’t produce continuous gray tones and had to build shading from lines. You can see it in many old master pen-and-ink drawings, and it remains common in pen illustration, comics and technical illustration today.
Because it works with any mark-making tool, it’s useful in pencil, ballpoint pen, fine-liner, dip pen and even digital drawing.
Cross-hatching in pencil vs pen
- In pencil, you can vary pressure, so a single line can range from light to dark. You can also erase and adjust. Cross-hatching in pencil is often combined with smoother shading.
- In pen, most lines are roughly the same darkness, so tone comes almost entirely from spacing, line weight and the number of layers. You can’t erase, which encourages planning. Many artists find pen cross-hatching a good way to really understand value.
Hatching in engineering drawing (a different meaning)
In technical and engineering drawing, “hatching” usually means something different: evenly spaced parallel lines, commonly at 45 degrees, used to mark the cut surfaces in a sectional view. It shows where an object has been sliced through, and different hatch patterns can indicate different materials or parts. It’s a convention for communicating information, not a way of showing light and shadow.
Common mistakes
- Uneven spacing, which makes patchy, blotchy tone. Slow down and aim for consistent gaps.
- Hooked or flicked line ends, which give a “hairy” look. Keep the stroke controlled from start to finish.
- Too many layers too quickly, which fills the area into a dark mass with no transitions. Build gradually.
- Lines that ignore the form, such as straight vertical hatching across a round object. It can work, but on curved forms contour lines often read better.
Cross-hatching is one of several core shading techniques. For how it fits with the others, see our guide to pencil shading for beginners.