Graphite Pencils

Drawing Pencils Explained: Which Types Work for Drawing

Can any pencil be used for drawing? A guide to the H and B grades, the main types of drawing pencils, which to sketch with, and a simple starter set.

On this page
  1. Can you draw with any pencil?
  2. What makes a drawing pencil different from a writing pencil
  3. How the H and B grading scale works
  4. Types of pencils used for drawing
  5. What pencil should you use to sketch?
  6. How to use HB, 2B, 4B and 6B pencils
  7. A simple starter set
  8. Tips for getting more out of any pencil

Can you draw with any pencil?

Yes. Any pencil that leaves a mark can be used to draw, and many good sketches have been made with an ordinary school pencil. The question is how much control and range you get.

A standard writing pencil is made to give a clean, medium-gray line that doesn’t smudge much. That’s fine for line sketches and quick studies. It gets harder when you want very pale construction lines or deep, rich darks. Drawing pencils come in a graded range, so you can pick the hardness that suits each part of a drawing instead of forcing one pencil to do everything.

So the practical answer: start with whatever you have, and add a few graded drawing pencils when you notice the limits.

What makes a drawing pencil different from a writing pencil

Both have the same basic core: graphite mixed with clay, then fired. The differences come down to range and consistency.

  • Graded hardness. Drawing pencils are sold in a series of grades, from hard and pale (H grades) to soft and dark (B grades). Writing pencils usually come in only one or two grades.
  • Smoother, more even core. Art-grade pencils are generally made to lay down graphite evenly, with fewer gritty bits that scratch the paper or leave streaks.
  • Consistency within a brand. A single maker’s range is designed so each grade steps evenly from the next, though no brand is perfect.
  • Plain finishes and markings. Drawing pencils usually have no eraser on the end, and the grade is clearly printed on the barrel.

How the H and B grading scale works

The common grading system uses letters and numbers:

  • H stands for hard. H pencils have more clay in the core, so they leave lighter, crisper lines and stay sharp longer. A higher number (2H, 4H, 6H) means harder and lighter.
  • B stands for black. B pencils have more graphite and less clay, so they’re softer and darker and wear down faster. A higher number (2B, 4B, 6B) means softer and darker.
  • HB sits in the middle and is the most common general-purpose grade.
  • F (often described as “fine” or “firm”) sits between HB and H on many scales.

Many art ranges run from about 9H to 9B, and some brands go further in one direction or both. In the US, writing pencils often use a number scale instead (#1, #2, #3 and so on). If you’ve wondered how those line up, see whether a No. 2 pencil is HB or 2B.

For more on what’s actually in the core, and how graphite differs from the carbon used in some “black” pencils, see graphite vs amorphous carbon in drawing pencils.

Grades vary between brands

There’s no shared industry standard for pencil hardness. One brand’s 2B can be noticeably darker or softer than another’s, and you may even find small inconsistencies between grades from the same maker. Many artists stick mostly to one brand so the steps between grades stay predictable, and make a quick value scale to see what their own pencils actually do.

Types of pencils used for drawing

Graphite pencils are the core of most drawing kits, but a few other formats are worth knowing about.

Wooden graphite pencils

The classic drawing pencil: a graphite-and-clay core in a wooden casing. They’re inexpensive, come in the widest range of grades, and can be sharpened to a long point for detail or a blunt, angled tip for shading. Most people learn to draw with these, and they’re the easiest place to start.

Mechanical pencils and leadholders

Mechanical pencils hold thin leads (commonly 0.3 to 0.9 mm) that never need sharpening, so the line width stays the same throughout a drawing. They’re popular for fine detail, technical drawing and sketching on the go. Leadholders (also called clutch pencils) take thicker leads, typically 2 mm, which you sharpen with a lead pointer. For the details on sizes and grade availability, see our guide to mechanical pencils for drawing.

Woodless graphite pencils and graphite sticks

Woodless pencils are solid graphite cores with a thin lacquer coating instead of wood. Graphite sticks and blocks are similar but chunkier. Because the whole thing is graphite, you can use the side to cover large areas of tone quickly, as well as the tip for lines. They’re handy for loose, expressive work and big tonal studies, though they’re more fragile than wooden pencils if dropped.

Carbon pencils

Carbon pencils use a carbon pigment instead of graphite, usually with a binder. They give a deep, matte black without graphite’s shine, and sit somewhere between graphite and charcoal in feel. They’re useful for strong darks, especially in drawings that will be photographed or seen under bright light.

Charcoal pencils

Charcoal pencils hold compressed charcoal in a wooden casing. They’re darker and more matte than graphite and blend easily, but they’re also dustier and smudge more. They’re a good bridge between graphite drawing and working with loose charcoal sticks.

Water-soluble graphite pencils

These look and draw like ordinary graphite pencils, but the marks loosen when you brush water over them, letting you create soft washes of gray. They’re useful for sketchbooks and mixed-media work. Use paper that can handle water if you plan to wet your drawings heavily.

Everyday #2 and carpenter pencils

A standard #2 writing pencil is roughly an HB and works fine for line sketches and practice. Carpenter pencils have a flat, rectangular core that can make both thin and broad marks depending on how you hold them, which some artists enjoy for loose sketching and lettering. Neither gives you the range of a graded set, but both are perfectly usable.

What pencil should you use to sketch?

For general sketching, a mid-range pencil such as an HB or 2B is a good all-rounder. It’s dark enough to see clearly, light enough to erase, and holds a point reasonably well.

A few rules of thumb:

  • Light, loose construction lines: H or HB, used with gentle pressure, so they’re easy to erase or draw over.
  • Expressive sketching: 2B or 4B gives darker, softer marks with less effort.
  • Sketching on the go: a 0.5 or 0.7 mm mechanical pencil in HB or B saves you carrying a sharpener.
  • Quick tonal sketches: a soft woodless pencil or graphite stick lets you block in shadows fast.

Pressure matters as much as grade. A single 2B can make a surprisingly wide range of values, from a pale whisper to a fairly strong dark, just by changing how hard you press. Switching grades is mainly about getting those values more comfortably and with the surface texture you want.

How to use HB, 2B, 4B and 6B pencils

These four grades cover most of what a beginner needs. Here’s one common way to use them together:

  1. HB for the layout. Lightly sketch the main shapes and proportions. HB is easy to erase and doesn’t leave dark grooves if you keep the pressure light.
  2. 2B for refining and mid-tones. Firm up the lines you’re confident about and start laying in mid-tone shading.
  3. 4B for shadows. Build the darker areas: cast shadows, the shadow side of forms, darker textures.
  4. 6B for the darkest accents. Save it for the deepest darks and small areas of strong contrast, such as the darkest crevices or the line where an object meets the surface it rests on.

A few things to keep in mind:

  • Work from light to dark. It’s much easier to darken an area than to lighten one, especially with soft grades.
  • Soft grades smudge more. Rest your hand on a scrap sheet of paper to avoid dragging graphite across the drawing.
  • Very soft grades can shine. Heavy layers of 6B or softer can look shiny under light. Building darks in layers, rather than pressing hard, usually looks better.
  • Avoid digging in. Pressing hard with a hard pencil can dent the paper, leaving grooves that stay white when you shade over them later.

For a fuller walkthrough of each grade and the order to use them in, see how to use HB, 2B, 4B and 6B pencils.

A simple starter set

You don’t need a full 20-pencil tin to start. A small, flexible set might be:

  • 2H: very light layout lines and pale tones
  • HB: general sketching and construction
  • 2B: mid-tones and confident lines
  • 4B: shadows
  • 6B: deepest darks

Add a kneaded eraser, a regular plastic eraser, a sharpener (or a craft knife and sandpaper block for longer points) and some smooth-to-medium drawing paper. Once you know which grades you reach for most, you can fill gaps or try other types like carbon or woodless pencils.

Tips for getting more out of any pencil

  • Make a value scale. Shade a strip of boxes with each pencil from light to as dark as it goes. It shows you how your particular pencils behave on your paper.
  • Match the paper to the work. Smoother paper suits fine detail and blending, while paper with more tooth (texture) grabs more graphite and suits bolder, textured shading.
  • Vary the sharpening. A long, sharp point gives precise lines. A blunt or angled tip covers tone quickly.
  • Hold the pencil differently. Holding it further back or on its side, overhand, gives looser lines and broader strokes than a writing grip.
  • Keep your darks in reserve. Using your softest pencil everywhere flattens a drawing. Strong contrast works best when it’s used selectively.

Whatever you draw with, regular practice matters more than having a perfect set of pencils. Start with what you have, notice what’s missing, and build your kit from there.

Keep exploring

Guides from other topics

All topics →