Drawing Basics

Easy 3D Pencil Drawing for Beginners

Easy 3D pencil drawing projects for beginners: shaded spheres, cubes, cylinders, a hand line illusion and a simple building, plus the rules behind the effect.

On this page
  1. Two Kinds of “3D” Pencil Drawing
  2. The Basic Rules That Make a Drawing Look 3D
  3. Which Pencils to Use
  4. Project 1: A Shaded Sphere
  5. Project 2: A Cube in Perspective
  6. Project 3: A Cylinder
  7. Project 4: The 3D Hand Line Illusion
  8. Project 5: An Easy 3D Building
  9. Anamorphic Trick Art: How the Pop-Out Effect Works
  10. How to Make Any Drawing Look More 3D

Two Kinds of “3D” Pencil Drawing

When people talk about “3D drawing” with a pencil, they usually mean one of two things:

  1. Drawing that shows solid form. Using shading, perspective and overlap so objects look like they have volume and sit in space. This is the foundation of all realistic drawing.
  2. 3D trick art. Optical illusions that appear to pop off the page or sink into it. Many rely on distorted shapes that only look correct from one viewing angle.

Trick art is built on the same skills as form drawing, so this guide starts with the basics and works toward the illusions.

The Basic Rules That Make a Drawing Look 3D

  • One light source. Decide where the light comes from and keep it consistent. The side facing the light is light, and the side facing away is dark.
  • A full range of values. Include white paper, several grays and a strong dark. Drawings that stay in the mid-grays tend to look flat.
  • Cast shadows. A shadow on the surface beneath or beside an object anchors it in space. Without one, objects can look like they’re floating.
  • Perspective. Parallel edges appear to converge as they recede. See what is perspective drawing? for the details.
  • Overlap. Things in front block things behind them. This is one of the strongest depth cues.
  • Lines that follow the form. Hatching or contour lines that curve around a form help show its shape.

Which Pencils to Use

An HB for light construction lines, a 2B for midtones, and a 4B or 6B for the darkest shadows will cover everything here. Our guide to HB, 2B, 4B and 6B pencils explains how to combine them.

Project 1: A Shaded Sphere

  1. Draw a circle lightly. Tracing a round object is fine for this exercise.
  2. Decide on a light direction, such as the upper left.
  3. Leave a small highlight unshaded on the upper left of the circle.
  4. Shade gradually darker as you move away from the light, following the curve of the sphere.
  5. Make the darkest band (the core shadow) a little in from the lower right edge.
  6. Leave a slightly lighter strip along the very edge on the shadow side. This is reflected light, and it should stay darker than the lit side.
  7. Add an oval cast shadow on the ground to the lower right, darkest right under the sphere where it touches.

Project 2: A Cube in Perspective

  1. Draw a horizontal line across the page for the horizon, or eye level.
  2. Place two dots on that line, well apart, as vanishing points.
  3. Below the horizon, draw a vertical line for the nearest corner of the cube.
  4. Connect the top and bottom of that line to both vanishing points with light lines.
  5. Draw two more vertical lines to mark the far corners on each side.
  6. Connect those corners to the opposite vanishing points to find the top face.
  7. Shade the three visible faces in three different values: the top lightest (if the light comes from above), one side medium and the other side darkest.
  8. Add a cast shadow on the ground on the side away from the light.

If the cube looks stretched, move your vanishing points farther apart.

Project 3: A Cylinder

  1. Draw two vertical parallel lines for the sides.
  2. Draw an ellipse at the top. If the cylinder is below your eye level, the bottom ellipse should appear a bit rounder than the top one. See our guide to drawing ellipses freehand.
  3. Shade the cylinder in vertical bands: lightest near the side facing the light, darkest a little before the far edge, with a sliver of reflected light at the very edge.
  4. Keep the top face light if the light comes from above.
  5. Add a cast shadow.

Project 4: The 3D Hand Line Illusion

This is a popular, easy illusion that looks impressive for very little effort.

  1. Place your hand flat on the paper and lightly trace around it with a pencil.
  2. With a marker or a dark pencil, draw horizontal lines across the page from one edge toward the hand.
  3. When a line reaches the hand outline, curve it upward in an arch as it crosses the hand, then bring it back down to straight once it leaves the outline on the other side.
  4. Repeat with lines spaced evenly down the page. Make the arches higher over the thicker parts of the hand and fingers.
  5. Erase the original traced outline.
  6. Optional: shade lightly under the arches on one side to strengthen the effect.

The bending lines suggest a surface rising over the hand, which the eye reads as a three-dimensional bump.

Project 5: An Easy 3D Building

  1. Start with the two-point box from Project 2, made longer on one side so it has a long side wall and a shorter end wall.
  2. On the end wall, find the center by drawing an X from corner to corner. Draw a vertical line up from where the lines cross and mark the roof peak on it.
  3. Connect the peak to the two top corners of the end wall to make a triangular gable.
  4. From the peak, draw the roof ridge toward the same vanishing point as the long side wall’s top edge, since the ridge runs parallel to that wall. Stop it directly above the far end of the long wall.
  5. Connect the far end of the ridge down to the far top corner of the long wall to complete the roof slope.
  6. Draw windows and a door as rectangles, using the same vanishing points so they follow their walls.
  7. Shade one wall darker than the other and add a cast shadow on the ground.

Anamorphic Trick Art: How the Pop-Out Effect Works

Many “3D drawings” online, such as a staircase going into the page or an object standing up off the paper, use anamorphic distortion. The drawing is deliberately stretched so that it only looks correct when viewed (or photographed) from a low angle at one end of the paper.

A few common techniques:

  • Stretching: the drawing is elongated along the direction you’ll view it from.
  • Cutting the paper: trimming the paper along part of the drawing’s outline, so the object appears to break the edge of the page.
  • Strong cast shadows: placed as if the object were standing on the paper.

These illusions usually depend on the viewing angle, and they often look odd when you view the paper straight on. A common approach is to sketch on a grid that is itself drawn in perspective, then photograph the result from the matching angle. They can be fun projects once you’re comfortable with the basic forms above.

How to Make Any Drawing Look More 3D

Run through this checklist on your next drawing:

  • Is there one consistent light source?
  • Is there a clear dark somewhere, not just mid-grays?
  • Does every object have a cast shadow?
  • Is the darkest part of the cast shadow right where the object touches the surface?
  • Do parallel edges converge correctly?
  • Do overlaps clearly show what is in front?
  • Do hatching lines follow the form?
  • Is the reflected light kept darker than the lit side?

For a fuller process for realistic shading, see realistic drawing for beginners.

The complete guide to drawing basics

Pencil Drawing for Beginners: Your First Steps
Read the guide

Keep exploring

Guides from other topics

All topics →