The Parts of an Ellipse
When you look at a circle at an angle, like the rim of a cup or the top of a can, it appears as an ellipse: a flattened oval that is symmetrical in both directions. Getting ellipses right is one of the biggest steps toward making round objects look convincing.
An ellipse has:
- A major axis: the longest line across it, through the center
- A minor axis: the shortest line across it, crossing the major axis at a right angle through the center
An ellipse is symmetrical about both axes. Each quarter is a mirror image of its neighbors. Both ends are evenly rounded, never pointed.
Artists often describe how open or closed an ellipse is by its degree. A very thin, almost-flat ellipse might be described as about 10 or 15 degrees, and a nearly circular one as about 75 or 80 degrees. A flat line would be 0 and a full circle 90. You don’t need precise numbers, but thinking “thin”, “medium” or “nearly round” helps.
How Ellipses Change With Eye Level
The degree of an ellipse depends on where it sits relative to your eye level:
- At eye level, a horizontal circle appears as a straight line.
- Slightly below (or above) eye level, it appears as a thin ellipse.
- Farther below (or above) eye level, it opens up and becomes rounder.
This has a very practical consequence. On a cup or bottle below your eye level, the bottom ellipse appears rounder than the top one, because it’s farther from your eye level. Drawing them the same degree is a common reason cups look flat or tilted.
The Most Useful Rule: The Minor Axis and the Central Axis
For a cylinder (a cup, a can, a bottle, a vase) the minor axis of each ellipse lines up with the central axis of the cylinder, the imaginary line running through its middle from top to bottom.
- For an upright cup, the central axis is vertical, so the minor axis is vertical and the ellipses’ long axes are horizontal.
- For a tilted bottle, the central axis tilts. The ellipses tilt with it, so that their minor axes stay aligned with the bottle’s axis.
- For a bottle lying on its side, pointing away from you, the central axis recedes into the distance. The ellipse at the end has its minor axis along that line.
If your ellipses don’t line up with the object’s axis, the object looks twisted or broken. Lightly drawing the central axis first and building the ellipses on it is one of the most reliable ways to avoid that.
How to Draw an Ellipse Freehand
- Lightly mark the axes. Draw a short vertical and horizontal cross for the center, and mark the ends of the major and minor axes so you know the width and height.
- Ghost the motion. Hover the pencil just above the paper and trace the ellipse in the air a few times.
- Draw from the shoulder or elbow, not the fingers. Finger movements tend to make lumpy curves. See how to hold a pencil when drawing for arm-led grips.
- Go around several times lightly. Let the pencil circle two or three times in one continuous motion, barely touching the paper.
- Pick the best line. Look at your light passes and darken the most accurate path.
- Draw through. Draw the full ellipse, including the back half that’s hidden in the real object. Seeing the whole shape makes it easier to get it symmetrical.
Speed helps. A smooth, moderately quick motion usually gives a better curve than a slow, careful one.
The Box Method for Checking
If you’re struggling to judge an ellipse, draw the square it would fit inside:
- Draw a square in perspective. See what is perspective drawing? for the basics.
- Draw an X from corner to corner to find the center.
- Draw lines through the center to the midpoints of each side.
- Draw the ellipse so it just touches each side at those midpoints, curving smoothly between them.
In perspective, the visual center of the ellipse is not exactly where the X crosses. The near half of the ellipse looks slightly larger than the far half. For most freehand drawing you don’t need to worry about this, but it explains why ellipses drawn strictly inside a perspective square sometimes look a little unbalanced.
Common Ellipse Mistakes
| Mistake | What it looks like | Fix |
|---|---|---|
| Pointed ends | A “football” or “lemon” shape | Keep the ends evenly rounded; draw through faster |
| Flat sides | A rounded rectangle or stadium shape | Let the curve continue across the whole edge |
| Lopsided halves | One side fatter than the other | Check symmetry around both axes |
| Wrong tilt | Ellipse tilted relative to the object | Align the minor axis with the central axis |
| Top and bottom the same degree | Cup looks flat or seen from nowhere | Make ellipses farther from eye level rounder |
| Only drawing the front half | Wobbly, uneven curve | Draw through the hidden back |
Drawing a Cup
- Draw the central axis as a light vertical line.
- Draw the rim ellipse centered on the axis, with its minor axis on the axis line.
- Mark the height of the cup and draw the base ellipse, slightly rounder than the rim if the cup is below eye level.
- Connect the sides with lines that meet the ellipses at their widest points, the ends of the major axes. Don’t connect them where the curves are already turning.
- Add the handle, checking the shape of the space inside it.
- Show thickness at the rim with a second, slightly smaller ellipse inside the first.
- Erase the hidden back of the base and shade. Our guide to easy object drawing with pencil shading walks through shading a mug.
Drawing a Bowl
A bowl is like a cup with a much wider top and a small base.
- Draw the central axis.
- Draw the wide rim ellipse.
- Draw a smaller ellipse for the foot. It will often be slightly rounder than the rim, if below eye level.
- Draw the curved sides from the ends of the rim’s major axis down to the foot, bulging outward.
- Add the inner rim thickness and, if visible, the curve of the inside of the bowl.
Drawing Cylinders: Bottles, Cans and Jars
- Cans and jars follow the same steps as a cup without the handle. Watch for ellipses at the lid and any label edges. Each one is a separate ellipse on the same axis, getting gradually rounder the farther it is from eye level.
- Bottles have several ellipses: base, shoulder, neck and lip. Draw them all on the same central axis, then connect them with the bottle’s contour.
- Tilted or lying cylinders: draw the tilted central axis first, then build each ellipse with its minor axis on that line.
Ellipse Drills
A few minutes a day can noticeably improve your ellipses:
- Ellipse page. Fill a page with ellipses of different sizes, drawn from the shoulder.
- Degree ladder. Draw a vertical line and stack ellipses along it, starting thin near the top (close to eye level) and getting rounder as you go down.
- Ellipse tunnels. Draw a series of ellipses on a single straight axis, getting larger or smaller, like rings of a tunnel.
- Tilted axes. Draw lines at various angles and build ellipses with their minor axis on each line.
- Still life of round things. Cups, bowls and jars arranged together. Our pencil drawing for beginners guide walks through a mug drawing step by step.
How to Check Your Ellipses
- Turn the page upside down or sideways. Asymmetry becomes easier to spot.
- Look in a mirror. Reversing the image shows errors your eye has stopped seeing.
- Fold or overlay tracing paper. Trace one half and flip it to compare with the other.
- Compare to the object. Hold your pencil along the major axis of the real ellipse and compare its tilt and proportions. See measuring proportions with your pencil.
Once ellipses feel comfortable, they’ll improve almost every drawing of manmade objects you make, from mugs to car wheels. They also underpin the cylinder project in easy 3D pencil drawing.