What Sight Measuring Is
Sight measuring is a way of judging proportions by holding a pencil at arm’s length and using it as a measuring stick against your subject. You’re not measuring in inches or centimeters. You’re comparing one part of the subject to another, for example “the bottle is three apple-widths tall”.
It works because proportions, the ratios between parts, stay the same whatever size your drawing is. If you get the ratios right, your drawing will look right whether it’s small or large.
Sight measuring also lets you check angles and alignments, which together with proportions make up much of what drawing teachers call “relationships”.
The Setup: Four Rules for Accurate Measuring
Sight measuring only works if every measurement is taken the same way. These four rules matter more than anything else:
- Lock your arm straight. Extend your arm fully and keep your elbow locked. If your arm bends a little more for one measurement than another, the pencil is at a different distance from your eye and the measurements no longer compare.
- Close one eye. With both eyes open, the pencil appears doubled or shifts against the subject. Closing one eye gives a single, stable view.
- Keep the pencil flat to the picture plane. Hold it perpendicular to your line of sight, as if laying it against an imaginary pane of glass between you and the subject. Don’t tilt the end toward or away from you. This is one of the most common errors, and it distorts measurements, especially vertical ones.
- Stay in the same position. Keep your head and body in the same place for every measurement. If you move, the view changes.
Step by Step: Measuring With a Unit
- Pick a unit. Choose one clear, fairly small part of the subject to compare everything else to. The width of a cup, the height of a head, or the length of a book spine all work. It should be easy to see and have well-defined ends.
- Measure the unit. With your arm locked and one eye closed, line up the tip of the pencil with one end of the unit. Slide your thumbnail along the pencil until it marks the other end.
- Compare. Keeping your thumb in place, move the pencil to another length, such as the total height of the subject. Count how many units fit. It might be “about two and a half”.
- Record the ratio, not the length. On your paper, decide how big your unit will be in the drawing. Then lay out the other lengths as multiples of that unit. You don’t need to transfer the pencil measurement directly. Your drawing can be any size.
- Check overall height against width first. Getting the overall proportions of the whole subject right before working on parts prevents most later problems.
A Worked Example: Bottle and Apple
Suppose you’re drawing a bottle with an apple beside it.
- Measure the apple’s width as your unit.
- Compare it to the bottle’s height: about 3 units.
- Compare it to the bottle’s width at its widest: about 1 unit.
- Compare the distance from the table to the bottle’s shoulder: about 2 units.
- On your paper, draw a light mark for the apple’s width. Use it to mark the bottle’s height (3×), width (1×) and shoulder height (2×).
- Now the two objects are in proportion to each other, whatever size you’ve drawn them.
Measuring Angles
To copy an angle, like the slope of a roof or the tilt of a book edge:
- Hold your pencil at arm’s length, flat to the picture plane, and rotate it until it lines up with the edge.
- Note the angle relative to true vertical or horizontal. It can help to think of it as a clock hand: “that edge points to about two o’clock”.
- Keep the pencil at that angle and bring it down to your paper, or compare it with a vertical or horizontal edge of your page.
- Draw a light guideline at that angle.
Angles are often more reliable than lengths for placing points, because a small error in an angle is easier to spot.
Plumb Lines and Level Lines
You can also use your pencil to check what lines up with what.
- Plumb line (vertical): hold the pencil straight up and down, then line it up with a point on the subject, such as the corner of an eye. See what else falls on that vertical line, for instance the corner of the mouth.
- Level line (horizontal): hold the pencil horizontally and line it up with a point. See what else is at the same height.
These checks are especially helpful for faces, buildings and furniture, where small misalignments are very noticeable. Combining them with the shapes of the gaps between things, as in negative space drawing, gives you another independent check.
Sight-Size vs Comparative Measurement
There are two traditional ways of measuring from life:
| Method | How it works | Common use |
|---|---|---|
| Comparative measurement | Compare parts of the subject to each other and draw at any size | Most sketching and observational drawing |
| Sight-size | Place the drawing beside the subject and draw it exactly as large as it appears from a fixed viewing position, then compare the two side by side from that spot | Traditional atelier cast and portrait drawing |
This article focuses on comparative measurement, which is more flexible for everyday drawing. Sight-size is very precise but needs a specific setup and a fixed viewing position several feet away.
Common Measuring Mistakes
- Bending the elbow. Your unit changes size between measurements. Lock the arm every time.
- Tilting the pencil toward you. This shortens measurements, especially vertical ones. Keep it flat to the picture plane.
- Changing position. Even shifting your head slightly can change what lines up.
- Choosing a unit that’s too small. Measuring a large subject in tiny units magnifies small errors. Choose a unit that fits into the subject a handful of times.
- Measuring from vague endpoints. Choose clear edges, not soft shadows or fuzzy outlines.
- Measuring everything. Over-measuring can make a drawing stiff and slow. Use measurement to establish the big relationships, then trust your eye.
When to Stop Measuring
Measuring is most useful early in a drawing: when you place the subject on the page, set the overall proportions and locate the main landmarks. Once the big relationships are right, rely more on your eye, and return to measuring when something looks wrong and you need to find out why.
Over time, regular measuring trains your eye, and you’ll find you need it less. To build that freehand judgment, combine measuring with exercises like blind contour drawing. When accuracy matters more than practice, for example when copying a photo, the grid method is an alternative. For the bigger picture of drawing fundamentals, see our guide to pencil drawing for beginners.