The short answer
To draw with charcoal, start by lightly blocking in the main shapes and shadows with soft vine or willow charcoal. Build up your tones in layers, blend where you want softness using a stump, tissue or cloth, then lift out the light areas with a kneaded eraser. Finish by adding the darkest darks and sharpest details with compressed charcoal or a charcoal pencil, and protect the drawing with fixative.
The guiding principle is to work from light to dark and from loose to precise. Light charcoal is easy to move and erase; heavy, compressed charcoal is not. Saving the strongest marks for last keeps the drawing flexible for as long as possible.
What you need to start
- Vine or willow charcoal for early layout and broad tone. It’s light and erases easily.
- Compressed charcoal (sticks) and/or charcoal pencils for deep blacks and detail. Pencils are easier to control; see our guide to sketching with charcoal pencils if you want to start there.
- Paper with some tooth. Charcoal paper, a medium-weight drawing paper, or toned paper. Very smooth paper holds little charcoal.
- A kneaded eraser for lifting and shaping lights, plus a vinyl eraser or eraser pencil for crisp highlights.
- Blending tools: a blending stump, tissues or paper towels, a chamois, or a soft brush.
- Fixative for finishing.
- A drawing board, clips or tape, and a scrap sheet of paper to rest your hand on.
If you’re not sure which type of charcoal to buy first, our comparison of vine and compressed charcoal explains what each one does.
Set up your workspace
A little setup saves a lot of frustration with charcoal.
- Work upright if you can. An easel or a board propped at a steep angle lets dust fall away from the drawing instead of collecting and smearing.
- Stand back from the paper. Holding charcoal at arm’s length and moving from the shoulder encourages loose, confident marks, especially early on.
- Light your subject from one side. A single lamp gives clear light and shadow shapes, which are much easier to draw than flat, all-over lighting.
- Protect your surroundings. Charcoal dust gets everywhere. Put down a cloth or newspaper, wear old clothes or an apron, and keep a damp cloth nearby for your hands.
Step-by-step: drawing with charcoal
1. Block in the big shapes lightly
Using vine charcoal and a light touch, sketch the overall outline, proportions and placement on the page. Think in simple shapes such as boxes, ovals and triangles. Don’t draw details yet. Because vine charcoal wipes away easily, you can adjust freely at this stage.
2. Map the shadows
Look for where the light hits your subject and where it doesn’t. Lightly outline the shadow shapes, including the shadow the object casts on the surface beneath it. Squint at the subject: it blurs out detail and makes light and dark shapes easier to see.
Fill the shadow shapes with a light, even tone using the side of the vine charcoal.
3. Build the middle tones
Add tone to the areas between full light and shadow, where the form turns away from the light. Build it gradually in layers rather than pressing hard. At this stage, try to keep the drawing to just a few values: light, middle and dark. Simplifying like this makes the drawing read clearly.
4. Blend where you want softness
Use a stump, tissue, chamois or soft brush to smooth transitions and soften edges. Blending also pushes charcoal into the paper’s texture for a richer tone.
Avoid blending everything. A drawing that’s all soft edges can look foggy; keeping some marks visible and some edges crisp adds life. It’s also best not to blend with your fingers, as skin oils can leave marks that resist erasing and further layers.
5. Lift out the lights
Erasers are drawing tools in charcoal, not just correction tools. Warm a kneaded eraser in your hand, pinch it into a shape, and dab or press it onto the paper to lift charcoal for soft light areas. Use a vinyl eraser or eraser pencil for sharper highlights, like the shine on a glass or a bright edge.
Some artists take this further and tone the whole sheet first, then draw mostly by erasing. That approach is covered in our guide to subtractive charcoal drawing.
6. Add the darkest darks and details
Once you’re happy with the overall drawing, switch to compressed charcoal or a soft charcoal pencil. Darken the deepest shadows, such as the line where the object touches the table, and sharpen key edges and details.
Hold back here. Compressed charcoal is hard to erase completely, and vine charcoal doesn’t sit well on top of heavy compressed marks, so this layer should come last.
7. Fix the drawing
When the drawing is finished, spray it with a few light coats of fixative, following the instructions on the can and working outdoors or in a well-ventilated space. Fixative can darken charcoal slightly, so light coats are better than one heavy one. A workable fixative can also be used between layers if you want to build very dark areas without the charcoal mixing.
Tips for cleaner charcoal drawings
- Rest your hand on a scrap sheet, never directly on the drawing.
- Don’t blow away dust. Tap the board gently over a bin instead. Blowing scatters dust across the drawing and into the air you breathe.
- Keep your kneaded eraser clean by stretching and folding it until the grey is worked in. When it stays dark and leaves marks, replace it.
- Step back often. Value and proportion problems are much easier to see from a distance.
- Don’t press too hard early. Heavy pressure flattens the paper’s tooth, so later layers won’t stick.
- Keep the dust down. Working in a ventilated space and wiping surfaces with a damp cloth are sensible habits.
A good first subject
Start with one simple object lit by a single lamp: an egg, a mug, a pear or a crumpled paper bag. Give yourself 30 to 45 minutes and follow the steps above. Then do the same object again with a different light direction.
It’s also worth practising a value scale beforehand: a row of boxes shaded from the white of the paper to the darkest black you can make. It shows you the range your charcoal can produce, and how much pressure each step takes.
Charcoal rewards repetition. Several short, simple drawings will teach you more about controlling it than one large, complicated one.