The short answer
A standard drawing pencil core is graphite mixed with clay, fired to harden it. Graphite is a form of carbon with an orderly, layered crystal structure. Carbon pencils use a non-crystalline (often called amorphous) carbon pigment, such as carbon black or lamp black, held together with a binder.
Both are carbon, but they behave differently on paper. Graphite gives silvery grays and turns shiny when layered heavily. Carbon gives a deeper, matte black that looks more like charcoal.
Is there carbon in a pencil?
Yes. Graphite is a form of pure carbon, so every graphite pencil is essentially carbon plus clay and small amounts of other ingredients. There’s no actual lead in pencil “lead.” The name comes from a centuries-old confusion, when graphite was mistaken for a type of lead ore.
Carbon pencils also contain carbon, just in a different physical form, which is why they’re marketed under the “carbon” name.
What mineral is used for pencils?
Graphite. It’s a naturally occurring mineral, and it’s also manufactured synthetically. A large, unusually pure deposit discovered in Borrowdale, in England’s Lake District, in the 16th century is often credited with kicking off widespread pencil use. Today pencil makers use graphite from mines around the world, often blended and finely ground to get a consistent texture.
The other main ingredient is clay, which acts as a binder and controls hardness.
Is pencil lead 100% graphite?
Usually not. A typical pencil core is a mixture of graphite and clay, and some manufacturers also add waxes or other ingredients to change how smoothly it glides. The method of firing a graphite-and-clay mix is generally credited to Nicolas-Jacques Conté in France in the 1790s, and it’s still the basis of how pencils are made.
Even woodless graphite pencils and graphite sticks, which look like solid graphite, normally contain a binder of some kind. Exact recipes are trade secrets and differ by brand.
What the hardness scale actually measures
The H and B scale mostly reflects the ratio of clay to graphite:
- More clay makes a harder core that leaves a lighter line. These are the H grades (2H, 4H and so on).
- More graphite makes a softer core that leaves a darker line. These are the B grades (2B, 4B and so on).
- HB sits in the middle, with F between HB and H on many scales.
Many art ranges span roughly 9H to 9B, though some brands extend further. There’s no single standard, so a 4B from one brand may not match a 4B from another. For a fuller tour of grades and pencil types, see Drawing Pencils Explained. For how the US numbering of writing pencils fits in, see whether a No. 2 pencil is HB or 2B.
What “amorphous carbon” means in a drawing pencil
In graphite, carbon atoms are arranged in flat sheets that slide over one another. That’s why graphite feels slippery and reflects light. “Amorphous” carbon has no such long-range order. Carbon black and lamp black, made from incompletely burned oil or other materials, are the typical pigments.
Strictly speaking, chemists note that materials like carbon black aren’t entirely without structure, but “amorphous carbon” is the common shorthand used by artists and manufacturers. In practice it means carbon without graphite’s layered, reflective structure.
Carbon pencils mix this pigment with a binder (often clay, sometimes with wax or oil) and encase it in wood, just like a graphite pencil. Many come in a small range of grades, such as soft, medium and hard, rather than graphite’s long scale.
Graphite vs carbon pencils on paper
Shine and glare
This is the biggest difference. Heavily applied graphite, especially soft grades, can develop a metallic sheen. Seen at an angle or under bright light, dark areas may look gray or reflective rather than black. Carbon stays matte, so darks look dark from any angle. That’s one reason artists who photograph or scan their work often use carbon for the deepest values.
Darkness
Carbon can usually reach a deeper black than graphite. Very soft graphite gets quite dark, but it tends to shine before it reaches true black. Carbon goes dark with less pressure and without the glare.
Erasing, smudging and blending
Graphite is generally easier to erase and more forgiving of mistakes, particularly in harder grades. Carbon tends to be harder to lift completely and can stain the paper slightly. Both can be blended with a stump or tissue. Carbon often blends in a way closer to charcoal, while graphite blends smoothly into soft grays.
Feel and sharpening
Graphite feels smooth and slippery. Carbon can feel drier or slightly grittier, depending on the brand. Carbon cores may be more fragile, so a sharp knife or a gentle sharpener helps avoid snapped points.
| Graphite pencil | Carbon pencil | |
|---|---|---|
| Pigment | Crystalline carbon (graphite) | Non-crystalline carbon (carbon black, lamp black) |
| Darkest value | Dark gray to near black | Deep, matte black |
| Surface finish | Can turn shiny when layered | Matte |
| Erasing | Generally easier | Generally harder to lift fully |
| Grade range | Wide (often around 9H to 9B) | Usually narrower |
| Feel | Smooth, slippery | Drier, closer to charcoal |
Hybrid pencils: carbon-boosted and matte graphite
Some manufacturers make pencils that sit between the two. A few “black” graphite lines add carbon to the graphite core so it goes darker with less shine. There are also pencils sold as matte graphite, which are formulated to reduce glare compared with standard graphite. Formulations vary by brand, so test one before relying on it for a finished piece.
Using graphite and carbon in the same drawing
Combining them is common: graphite for the lighter values and fine detail, carbon for the darkest shadows. A few practical points:
- Plan the dark areas first if you can. Graphite leaves a slick, slightly waxy surface, and many artists find carbon or charcoal grips less well on top of heavy graphite. Laying carbon down earlier, or keeping graphite light where carbon will go, tends to work better.
- Test on scrap paper. The way the two layer depends on the paper and the specific pencils.
- Watch the transition. The change from shiny graphite to matte carbon can show if the edge is abrupt. Blending at the boundary, or building up gradually, helps.
- Consider fixative. Carbon smudges more readily than graphite. A workable fixative between layers, or a final fixative, can help protect the drawing. Use it in a well-ventilated space and follow the product instructions.
Which should you choose?
- Choose graphite for most everyday drawing, sketching, fine detail and work where you’ll erase a lot. It offers the widest grade range and is the easiest to control.
- Choose carbon when you want deep, matte blacks, when glare is a problem, or when you like the look of charcoal but want the control of a pencil.
- Use both for realistic tonal drawings with a full range from the palest grays to rich blacks.
If you’re just starting, a basic set of graphite pencils is all you need. Add a carbon pencil later once you find yourself wanting darker, flatter shadows.